Info

Be careful, backup goi_config from uboot before changing the firmware.

GPON ONU status

Querying a particular OMCI ME

omci_pipe.sh meg MIB_IDX ME_IN

Where MIB_IDX is the MIB ID and ME_IN is the ME instance number

Getting/Setting Speed LAN Mode

To enable the interface to sync at 2.5 Gbps / using HSGMII with auto-neg on:

fw_setenv sgmii_mode 5

To revert the afore-mentioned command:

fw_setenv sgmii_mode

To check the set value fo the LAN Mode:

onu lanpsg 0

The link_status variable tells the current speed:

Value (for sgmii_mode and link_status)	Speed
3	1 Gbps / SGMII with auto-neg on
4	1 Gbps / SGMII with auto-neg off
5	2.5 Gbps / HSGMII with auto-neg on

GPON/OMCI settings

Getting/Setting OMCI software version (ME 7)

fw_setenv image0_version V1.7.6-170626
fw_setenv image1_version V1.7.6-170626

Setting ONU GPON PLOAM password

fw_setenv nPassword "0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39"

or

uci set gpon.ploam.nPassword="0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39"
uci commit

Setting ONU GPON LOID and LOID password

fw_setenv omci_loid 1234567890
fw_setenv omci_lpwd password01

If LOID is disabled in the firmware try alternative software.

Setting ONU GPON Serial Number

fw_setenv ont_serial ABCD12345678

or

uci set gpon.ploam.nSerial="0x48 0x57 0x54 0x43 0x9D 0xAC 0xC7 0xA3"
uci commit

Setting and checking oem-generic

fw_setenv target oem-generic
fw_printenv target=oem-generic